Oximino Silanes Intermediate | Anti-Skinning Agent | Ketoxime
|
| SiSiB® PB2002
Methyl Isobutyl Ketoxime.
Synonym: MIBKO;
4-Methyl-2-pentanone oxime
|
Skinning is the biggest nuisance in protective coatings. Skinning causes the avoidable waste of a costly coating material.
Paint containers are not always filled to the brim. So air present in a void reacts with the paint, thereby causing oxidation and polymerization of the coating at the air/paint interface. This results in formation of a solid skin during storage.
The lost of paint due to skinning is estimated to be as much as 3 to 5%. This not only worries the consumers but also the manufacturers when it comes to filling of small containers. The minute doze of an effective anti-skinning agent can alleviate the difficulty of skinning.
SiSiB® PB2002 is one of the finest anti-skinning agents. It has proved very effective in preventing the formation of surface skin in the packaged solvent based paint, varnishes and printing inks also.
|
| Typical Physical Properties |
| Chemical Name: |
Methyl Isobutyl Ketoxime |
| CAS No.: |
105-44-2 |
| EINECS No.: |
203-298-2 |
| Empirical Formula: |
C6H13NO |
| Molecular Weight: |
115.17 |
| Boiling Point: |
68-70°C/8mmHg |
| Flash Point: |
173°C |
| |
|
| Color and Appearance: |
Colorless transparent liquid |
| Color (Pt-Co): |
Max.10 |
| Density [25°C]: |
1.4440 |
| Refractive Index [25°C]: |
0.880 |
| Acid Value: (mg KOH/g) |
Max.2.0% |
| Purity: |
99.0% |
SiSiB® PB2002 can be used as intermediate for novel silane crosslinkers:
Methyl tris-(methyl isobutyl ketoximino) silane
Vinyl tris-(methyl isobutyl ketoximino) silane
Tetrakis-(methyl isobutyl ketoximino) silane.
SiSiB® PB2002 can be used as anti-skinning agent.
|
Net weight 210L steel drum or 1000L IBC container, for more details, please visit Packing Centre.
|
|
