SiSiB® FS0380 is a hydrophilic fumed silica with a specific surface area of 380 m2/g.
Introduction
Hydrophilic fumed silica is manufactured by hydrolysing volatile chlorosilanes in an oxyhydrogen flame. In chemical terms, the loose white powder consists of highly pure amorphous silicon dioxide. Hydrophilic silica is wetted by water and can be dispersed in water. Hydrophobic silica is produced by the chemical reaction of hydrophilic silica with reactive silanes, e.g. chlorosilanes or hexamethyldisilazane. It has water-repellent properties and is no longer dispersible in water.
All untreated fumed silicas are characterized by:
High purity
Aggregated structure
Submicron particle size
Low bulk density
Hydrophilic surface
Typical Physical Properties
CAS No.:
112945-52-5 or 7631-86-9
EINECS No.:
231-545-4
Specific surface area (BET):
380 +/- 15m2/g
Average primary particle size:
5~40 nm
SiO2 content, wt. %
> 99.8% (based on the substance heated at 1000°C for 2 h)
Loss on drying, ex works, wt. %
<2.5% (2h at 105°C)
Ignition loss (1000°C / 2h), wt.%
<2.0% (based on the substance dried at 105°C for 2 h)
pH value
3.6~4.3 (In 4% aqueous dispersion)
Tamped density
~50g/l
Applications
SiSiB® FS-0380 can be applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives and others, if high gloss and transparency is required.
SiSiB® FS-0380 can be used as a reinforcing filler in elastomers, mainly silicone-elastomers.
SiSiB® FS-0380 can be used as a free flow additive in the production of powder substances and food stuff.
Packing and Storage
SiSiB® FS-0380 is supplied in multiple layer 10 kg bags.
In the original unopened packaging, SiSiB® FS-0130 has a shelf life of 24 months under dry conditions.