Silane Coupling Agents | Reinforcing Agent | Sulfur Silanes | Surface Modifiers

SiSiB® PC2200

Bis(3-triethoxysilylpropyl)disulfide.
Synonym: Bis(3-triethoxysilylpropyl)disulfane;

Countertype of Degussa VP Si 75, DowCorning Z-6920, Silquest A-1589


Chemical Structure


Introduction

Heretofore, carbon black has been used as a reinforcing filler for rubber because carbon black provides higher reinforcement and more excellent abrasion resistance than other fillers. Recently, because of social requirements to save energy and to save resources, particularly to cut down fuel consumption of automobiles, a decrease in the heat buildup of rubber compositions is also required.

For decreasing the heat buildup of rubber compositions by using carbon black, use of a small amount of carbon black or carbon black having a large particle size is considered. It is, however, well known that, in both methods, decreasing heat buildup is in a contradictory relation with improving reinforcement and abrasion resistance of a rubber composition.

On the other hand, silica is known as a filler which provides decreased heat buildup of a rubber composition. However, silica particles tend to cohere together due to hydrogen bonding of silanol groups which are functional groups on the surfaces of the silica particles. For improving the dispersion of silica particles into rubber, the mixing time must be increased. When dispersion of silica particles into rubber is insufficient, a problem arises in that processability in processes such as extrusion and the like deteriorates due to the increase in the Mooney viscosity.

Moreover, the surfaces of the silica particles are acidic. Therefore, there are problems in that basic substances used as vulcanization accelerators are absorbed such that vulcanization is not carried out sufficiently, and a sufficient modulus of elasticity is not obtained.

In order to solve these problems, we developed various types of silane coupling agents. For example, SiSiB® PC2000 and SiSiB® PC2200. In the following article we would like to inform you about the silane coupling agent SiSiB® PC2000, SiSiB® PC2200 and its other commercial forms SiSiB® PC2000B and SiSiB® PC2000S.

SiSiB® PC2000 is a bifunctional polysulfidic organosilane for the rubber industry defined chemically as Bis(3-triethoxysilylpropyl)tetrasulfide. It is used to improve the reinforcing capability of fillers with silanol group on their surface (e.g., silicas, silicates, clay, etc.), and also as an integral part of curing systems to improve crosslinking network properties.

However, when the mixing temperature of rubber is low, the sufficient reinforcing effect is not obtained by this type of silane coupling agent. Dispersion of the silica into the rubber is also inferior, and this causes deterioration of the low heat buildup property that is the strong point of a rubber composition containing silica. Moreover, the silane coupling agent is hydrolyzed, and the generated ethanol does not vaporize sufficiently and vaporizes during extrusion. Thus, there is a drawback in that blisters are formed.

On the other hand, when mixing is conducted at high temperatures of 150.degree. C. or more, the reinforcing property is improved. However, as a drawback, the polysulfide is to decarbolize to form free sulfur during mixing at high temperatures of 150°C or higher. The free sulfur will result in the vulcanization of rubber at the temperatures. So that, in this temperature range, gelation of the polymer reduces the rheological property of system. Thus, processing in later stages becomes impossible in actuality.

To prevent gelation of the polymer, it is necessary to reduce the content of high polysulfide silane such as pentasulfide silane, heptasulfide silane, hexasulfide silane, and the like, in the polysulfide Silane. Therefore, as a result we developed a novel silane coupling agent SiSiB® PC2200 which is suitable for mixing at a high temperature.

The novel silane coupling agent SiSiB® PC2200 solves the above problems of the conventional art. The polysulfide structure in which the distribution of sulfur is specified can ensure its stability at high temperature. Thus, it can be avoided to decarbolize to form free sulfur. The silanol group on the surface of silica can react sufficiently with the silane coupling agent. And at the same time, the dispersion of the silica into a rubber is remarkably improved, furthermore there are no effect on the property processing. Thus it can improve the productivity of rubber processing and the low heat buildup property and abrasion resistance is improved.

Typical Physical Properties

Chemical Name: Bis(3-triethoxysilylpropyl)disulfide
CAS No.: 56706-10-6
EINECS No.: 260-350-7
Empirical Formula: C18H42O6S2Si2
Molecular Weight: 486
Boiling Point: Decomposition above 250°C [760mmHg]
Flash Point: Min.120 °C
   
Color and Appearance: Yellowish clear liquid
Density [25°C]: 1.03
Volatiles components(%) Max 4.0%
Average chain length(%) 2.35 +/- 0.15
Total Sulfur (standard value)(%) 15.2 +/- 0.5
Soluble in Primary alcohols, ketones, benzene, toluene, chlorinated hydtocarbons, acetonitrile, dimethylformaminde, dimethysulfoxide
Insoluble in Water

Applications

DOSAGE
Suggested dosage per 100 parts of filler:
For silica-3~13 parts;
For clay and talc-0.5~1.0 parts;

When used in rubber compounds, it produces these effects:
Coupling agent for non-black pigments.
Cure equilibrium for reversion resistance.
Curing agent for good heat aging.

Coupling Agent - With as little as 0.5 to 1.0 phr with clay fillers and 1.0 to 4.0 phr for silica pigments, PC2000 couples the non-black pigment and elastomers resulting in increases in modulus and increase in abrasion resistance.

Cure Equilibrium - PC2000 has four sulfur atoms positioned in the center. At cure temperatures, these participate with sulfur in producing polysulfidic crosslinks. The PC2000 replaces crosslinks broken during cure, resulting in reversion resistant, and with proper compounding, reversion free compounds. This is known as equilibrium cure. The dynamic flex characteristics, E.G., heat generation and crack growth, are dramatically improved.

Curing Agent - Removing all sulfur from the compound for NR, SBR, NBR and replacing it with PC2000 and certain thiuram accelerators, produces compounds with excellent heat aging characteristics in addition to the coupling effects. PC2000 is a silane coupling agent that has crosslinking and accelerator activity in rubber compounds.

Area of rubber industry where them would be beneficial
Footwear - Abrasion resistance | Cutting and chunking resistance | Flex life improvement

Rolls - Abrasion resistance | Aging resistance | Processing | Set reduction (better load bearing) | Reduced water swell | Lower hysteresis

Mechanical Molded Goods - Increased modulus | Better heat aging | Compression set reduction | Dynamic property improvement | Reduced swell to polar liquids | Filler substitution (non-black for black)

Hose - Improved abrasion on cover | Better heat aging | Increased modulus | Lower compression set | Improved adhesion to reinforcing elements

Solid Tires - Improved abrasion | Lower hysteresis | Higher modulus | Improved processing | Possibly better adhesion

Tires - Treads for abrasion, hot tear | Carcass for adhesion and/or filler substitution | Breaker (belt) stocks for adhesion

Belts Flat Belts - Increased abrasion | Improved reversion resistance | Reduced cost with clay substitution for black | Improved cord adhesion | Increased flex life and modulus

V Belts - Increased modulus | Improved abrasion | Longer flex life | Improved adhesion to reinforcing elements

Packings

Net weight 210L steel drum or 1000L IBC container, for more details, please visit Packing Centre.

Technical Library

Download Technical Data Sheet Safety Data Sheet

Search    

Download 2010 SiSiB® SILANE Catalogue